Our products
Window scantling
Laminated scantlings for frames and/or sashes
Special gluing, louvres in rift or half rift. Width glued BV
2 or 3-sided as top layer without zinc coating up to 3500 mm Up to 5000 mm on request
Window scantlings
Laminated scantlings for frames and/or sashes
D/K/K/D or D/K/K/K
Cover layers: Continuous without galvanisation up to 3500 mm (stock) On request, cover layer without galvanisation up to 5000 mm. Thicker scantlings with more slats are possible.
Window scantling
Laminated scantlings for frames and/or sashes
D/K/D or D/K/K
Cover layers: Continuous without galvanisation up to 3500 mm (stock) Cover layer without galvanising up to 5000 mm on request.
Window scantling
Laminated scantlings for frames and/or sashes
D/K/K/D or D/K/K/K width glued
Cover layers: Continuous without finger-jointing up to 3500 mm (stock) On request top layer without finger joint up to 5000 mm.
Window scantling
Laminated scantlings for frames and/or sashes
D/K/D or D/K/K width glued
Cover layers: Continuous without finger-jointing up to 3500 mm (stock) On request top layer without finger joint up to 5000 mm.
.png&w=3840&q=75)
HST lift and slide door frame
For natural wooden windows Cover layers 10 mm on both sides Centre layer vertically glued slats 2 wide and 1 narrow visible side
Cover layers: Continuous without galvanisation up to 3500 mm (stock) On request, top layer without galvanisation up to 5000 mm.
HST lift and slide door frame
Width glued BV 2 narrow and 1 wide visible side 4 sides continuous on request
Cover layers: Continuous without finger-jointing up to 3500 mm (stock) On request, cover layer without galvanising up to 5000 mm.
.png&w=3840&q=75)
Post bolt scantling
Layer-glued scantlings Up to 220 mm thickness Inner and/or outer scantlings without zinc coating up to 3500 mm On request also possible up to 5000 mm length
5 to 12 layers or as required
RUF oak briquettes
OAK BRIQUETTES
Briquettes burn CO2-neutral and cleaner than conventional logs. Our RUF oak briquettes burn continuously for a long time. The cuboid shape enables easy stacking with minimum space requirements.
We only use pure oak chips without bark or other foreign matter for production. This results in a tested and record-breaking low ash content of less than 0.1%.
The briquettes are sold as whole pallets (960kg).